Having a dishwasher that is not performing at optimum level can be a real inconvenience. Apart from ending up with dishes that are not completely clean, the appliance can also end up being energy inefficient. Fortunately, most dishwasher issues can be avoided with proper usage and maintenance. It is very important to ensure that your dishwasher is in good condition at all times. With proper care and attention, your appliance should give you years of worry-free and optimum performance.
1. THE DISHWASHER POSITION
You have to make sure that the dishwasher is installed on a level surface. If the dishwasher is not level, it could result in leaking. You can check the positioning by opening the door and placing an air-bubble on the edge level along the inside. If the appliance is not level, make adjustments by raising or lowering one side or using a wedge to ensure correct balance.
2. INSPECTING THE GADGETS
Check the gaskets to look for signs of cracks or deterioration. The rubber or plastic seals that appear along the appliance door provide a tight seal when the dishwasher is closed. If you notice water on the floor around the dishwasher, it can be because of faulty gaskets. If you notice that the gasket is damaged, you should remove and replace it with a new one recommended by the manufacturer. Before you install a new gasket, make sure that you make it flexible by soaking it in hot water.
3. CHECKING THE SPRAYER ARM
Inspect the sprayer arm for clogging that can occur from mineral deposits, food particles and other debris. It is important to clean the small holes in the dishwasher from time to time to enable the appliance to work more efficiently. Remove the dishwasher sprayer arm regularly and soak it in warm vinegar to loosen all the obstructions then use a pipe cleaner or awl to clean out the spray holes.
4. AVOID ELECTRICAL ACCIDENTS
A dishwasher is usually a low maintenance appliance and keeping it running in top shape does not take much. It is, however, very important to avoid getting zapped by ensuring proper appliance wiring. Dishwashers have motors and built-in water heaters that can consume a lot of power and when you add water to the equation, you know that improper wiring can lead to fire, electrocution or power outages. It is important to ensure that the dishwasher is wired directly or plugged into a grounded outlet.
5. CLEANING THE FILTERS
Inspect and clean the dishwasher screens and filters. A dishwasher comes with a screen or filter that is located close to the bottom of the dishwasher. They are placed above the food drain in order to catch debris and large food particles. It is important to clean the parts regularly to avoid clogs. Follow the manufacturerâ€™s manual to get instructions that will help you to remove and clean the filter.It is very important to get professional appliance repair to make sure that your dishwasher continues to operate at optimum level. If your appliance is not working as it should get professional repair services as soon as possible.